straumann implants Archives - Emerginnova https://emerginnova.com/product-tag/straumann-implants/ Wed, 19 Jun 2024 04:53:12 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.1 https://emerginnova.com/wp-content/uploads/2019/04/fav-100x100.png straumann implants Archives - Emerginnova https://emerginnova.com/product-tag/straumann-implants/ 32 32 Impression Material – RN Closed Tray Impression Post – P36512 https://emerginnova.com/product/impression-material-rn-closed-tray-impression-post/?utm_source=rss&utm_medium=rss&utm_campaign=impression-material-rn-closed-tray-impression-post https://emerginnova.com/product/impression-material-rn-closed-tray-impression-post/#respond Wed, 30 May 2018 12:26:58 +0000 https://emerginnova.com/?post_type=product&p=1124 Impression Material - SN Lab Analog most accurate impression technique to transfer the intra-oral position of implant fixtures to the working cast.

Material: Aluminum
Sleeve height: 7mm
Height incl. screw: 14mm

The post Impression Material – RN Closed Tray Impression Post – P36512 appeared first on Emerginnova.

]]>
Preview Name Dimension material
Impression Material - RN Closed Tray Impression Post
ZERAMEX®P6 Transfer Closed Tray RN
Sleeve height: 7mm

Height incl. screw: 14mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Impression Taking Art no. name dimension Link

Impression Material - RN Open Tray Impression Post
P36510
ZERAMEX®P6 Transfer Open Tray RN
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

Impression Material - RN Closed Tray Impression Post
P36512
ZERAMEX®P6 Transfer Closed Tray RN
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
P36513
ZERAMEX®P6 Transfer Closed Tray, long RN
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

The post Impression Material – RN Closed Tray Impression Post – P36512 appeared first on Emerginnova.

]]> https://emerginnova.com/product/impression-material-rn-closed-tray-impression-post/feed/ 0