ZERAMEX P6 - IMPRESSION MATERIAL https://emerginnova.com/product-category/zeramex-p6/zeramex-p6-impression-material/ Sat, 27 Apr 2024 03:52:25 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.1 https://emerginnova.com/wp-content/uploads/2019/04/fav-100x100.png ZERAMEX P6 - IMPRESSION MATERIAL https://emerginnova.com/product-category/zeramex-p6/zeramex-p6-impression-material/ 32 32 ZERAMEX®P6 Transfer Closed Tray, long RN – p36513 https://emerginnova.com/product/p36513/?utm_source=rss&utm_medium=rss&utm_campaign=p36513 https://emerginnova.com/product/p36513/#respond Wed, 24 Apr 2019 16:27:32 +0000 https://emerginnova.com/?post_type=product&p=1728 ZERAMEX® Prosthetics - Impression Taking

Long Closed Tray RN Impression Coping

Sleeve height: 11mm
Height incl. screw: 18mm

Material - PEEK-CW30, Aluminum

The post ZERAMEX®P6 Transfer Closed Tray, long RN – p36513 appeared first on Emerginnova.

]]>
Preview Name Dimension material
Impression Material - RN Closed Tray Impression Post
ZERAMEX®P6 Transfer Closed Tray, long RN
Sleeve height: 11mm

Height incl. screw: 18mm
PEEK-CW30, Aluminum
Impression Taking Art no. name dimension Link

Impression Material - RN Open Tray Impression Post
P36510
ZERAMEX®P6 Transfer Open Tray RN
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

Impression Material - RN Closed Tray Impression Post
P36512
ZERAMEX®P6 Transfer Closed Tray RN
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
P36513
ZERAMEX®P6 Transfer Closed Tray, long RN
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

The post ZERAMEX®P6 Transfer Closed Tray, long RN – p36513 appeared first on Emerginnova.

]]> https://emerginnova.com/product/p36513/feed/ 0 ZERAMEX®XT Implant-Replica WB – WB37522 https://emerginnova.com/product/zeramex-xt-implant-replica-wb/?utm_source=rss&utm_medium=rss&utm_campaign=zeramex-xt-implant-replica-wb https://emerginnova.com/product/zeramex-xt-implant-replica-wb/#respond Tue, 04 Dec 2018 10:52:11 +0000 https://emerginnova.com/?post_type=product&p=1448 ZERAMEX® Prosthetics RB – Plattform

ZERAMEX®XT Implant-Replica WB
Length: 10mm
Material: Aluminum

The post ZERAMEX®XT Implant-Replica WB – WB37522 appeared first on Emerginnova.

]]>
Auxiliary parts Name Dimension material
WB37520
ZERAMEX® XT Implant Replica WB
Length: 10mm
Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Taking impressions Art no. name dimension Link

ZERAMEX® XT Transfer Open Tray RB
RB36510
ZERAMEX® XT Transfer Open Tray RB
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

ZERAMEX® XT Transfer Closed Tray RB
RB36512
ZERAMEX® XT Transfer Closed Tray RB
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
RB36513
ZERAMEX® XT Transfer Closed Tray, long RB
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

ZERAMEX® XT Scanbody RB (incl. Screw)
RB36514
ZERAMEX® XT Scanbody RB (incl. Screw)
Height: 10mm

Buy Now
Auxiliary parts Art no. name dimension Link

ZERAMEX®XT Implant-Replica RB
RB36520
ZERAMEX® XT Implant Replica RB
Length: 10mm

Buy Now

ZERAMEX® XT Provisional Screw RB & WB
RB36550
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm

Buy Now

ZERAMEX®XT LAB Screw RB & WB
RB36553
ZERAMEX® XT Lab Screw RB & WB
Length: 7.4mm

Buy Now

The post ZERAMEX®XT Implant-Replica WB – WB37522 appeared first on Emerginnova.

]]> https://emerginnova.com/product/zeramex-xt-implant-replica-wb/feed/ 0 ZERAMEX®XT Temporary Abutment WB (incl. Screw) – WB37530 https://emerginnova.com/product/zeramex-xt-provisorium-wb-incl-screw/?utm_source=rss&utm_medium=rss&utm_campaign=zeramex-xt-provisorium-wb-incl-screw https://emerginnova.com/product/zeramex-xt-provisorium-wb-incl-screw/#respond Tue, 04 Dec 2018 10:52:11 +0000 https://emerginnova.com/?post_type=product&p=1452 ZERAMEX® XT Temporary Abutment WB (incl. Screw):

Abutment Height: 7mm
Collar Height: 1mm
diameter: 6mm
Material: PEEK, VICARBO®

The post ZERAMEX®XT Temporary Abutment WB (incl. Screw) – WB37530 appeared first on Emerginnova.

]]>
Auxiliary parts Name Dimension material
ZERAMEX-XT-Provisonal-RB-with-Screw
ZERAMEX® XT Provisional WB (incl. Screw)
AH: 7mm

CH: 1mm

dia.: 6mm
PEEK, VICARBO®

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Taking impressions Art no. name dimension Link

ZERAMEX® XT Transfer Open Tray RB
RB36510
ZERAMEX® XT Transfer Open Tray RB
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

ZERAMEX® XT Transfer Closed Tray RB
RB36512
ZERAMEX® XT Transfer Closed Tray RB
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
RB36513
ZERAMEX® XT Transfer Closed Tray, long RB
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

ZERAMEX® XT Scanbody RB (incl. Screw)
RB36514
ZERAMEX® XT Scanbody RB (incl. Screw)
Height: 10mm

Buy Now
Auxiliary parts Art no. name dimension Link

ZERAMEX®XT Implant-Replica RB
RB36520
ZERAMEX® XT Implant Replica RB
Length: 10mm

Buy Now

ZERAMEX® XT Provisional Screw RB & WB
RB36550
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm

Buy Now

ZERAMEX®XT LAB Screw RB & WB
RB36553
ZERAMEX® XT Lab Screw RB & WB
Length: 7.4mm

Buy Now

The post ZERAMEX®XT Temporary Abutment WB (incl. Screw) – WB37530 appeared first on Emerginnova.

]]> https://emerginnova.com/product/zeramex-xt-provisorium-wb-incl-screw/feed/ 0 ZERAMEX®XT Transfer Closed Tray WB – WB37512 https://emerginnova.com/product/zeramex-xt-transfer-closed-tray-wb/?utm_source=rss&utm_medium=rss&utm_campaign=zeramex-xt-transfer-closed-tray-wb https://emerginnova.com/product/zeramex-xt-transfer-closed-tray-wb/#respond Tue, 04 Dec 2018 10:52:10 +0000 https://emerginnova.com/?post_type=product&p=1436 ZERAMEX® Prosthetics WB – Plattform

ZERAMEX®XT Transfer Closed Tray WB

Sleeve height: 7mm
Height incl. screw: 14mm
Material: PEEK-CW30, Aluminum

The post ZERAMEX®XT Transfer Closed Tray WB – WB37512 appeared first on Emerginnova.

]]>
Auxiliary parts Name Dimension material
ZERAMEX-XT-Transfer-Closed-Tray-WB-510x510
ZERAMEX® XT Transfer Closed Tray WB
Sleeve height: 7mm Height incl. screw: 14mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Taking impressions Art no. name dimension Link

ZERAMEX® XT Transfer Open Tray RB
RB36510
ZERAMEX® XT Transfer Open Tray RB
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

ZERAMEX® XT Transfer Closed Tray RB
RB36512
ZERAMEX® XT Transfer Closed Tray RB
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
RB36513
ZERAMEX® XT Transfer Closed Tray, long RB
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

ZERAMEX® XT Scanbody RB (incl. Screw)
RB36514
ZERAMEX® XT Scanbody RB (incl. Screw)
Height: 10mm

Buy Now
Auxiliary parts Art no. name dimension Link

ZERAMEX®XT Implant-Replica RB
RB36520
ZERAMEX® XT Implant Replica RB
Length: 10mm

Buy Now

ZERAMEX® XT Provisional Screw RB & WB
RB36550
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm

Buy Now

ZERAMEX®XT LAB Screw RB & WB
RB36553
ZERAMEX® XT Lab Screw RB & WB
Length: 7.4mm

Buy Now

The post ZERAMEX®XT Transfer Closed Tray WB – WB37512 appeared first on Emerginnova.

]]> https://emerginnova.com/product/zeramex-xt-transfer-closed-tray-wb/feed/ 0 ZERAMEX®XT Transfer Closed Tray, long ,WB – WB37513 https://emerginnova.com/product/zeramex-xt-transfer-closed-tray-long-wb/?utm_source=rss&utm_medium=rss&utm_campaign=zeramex-xt-transfer-closed-tray-long-wb https://emerginnova.com/product/zeramex-xt-transfer-closed-tray-long-wb/#respond Tue, 04 Dec 2018 10:52:10 +0000 https://emerginnova.com/?post_type=product&p=1440 ZERAMEX® Prosthetics WB – Plattform

ZERAMEX®XT Transfer Closed Tray, long, WB

Sleeve height: 11mm
Height: 18mm
Material: PEEK-CW30, Aluminum

The post ZERAMEX®XT Transfer Closed Tray, long ,WB – WB37513 appeared first on Emerginnova.

]]>
Auxiliary parts Name Dimension material
ZERAMEX-XT-Transfer-Closed-Tray-WB-510x510
ZERAMEX® XT Transfer Closed Tray, long WB
Sleeve height: 11mm

Height incl. screw: 18mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Taking impressions Art no. name dimension Link

ZERAMEX® XT Transfer Open Tray RB
RB36510
ZERAMEX® XT Transfer Open Tray RB
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

ZERAMEX® XT Transfer Closed Tray RB
RB36512
ZERAMEX® XT Transfer Closed Tray RB
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
RB36513
ZERAMEX® XT Transfer Closed Tray, long RB
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

ZERAMEX® XT Scanbody RB (incl. Screw)
RB36514
ZERAMEX® XT Scanbody RB (incl. Screw)
Height: 10mm

Buy Now
Auxiliary parts Art no. name dimension Link

ZERAMEX®XT Implant-Replica RB
RB36520
ZERAMEX® XT Implant Replica RB
Length: 10mm

Buy Now

ZERAMEX® XT Provisional Screw RB & WB
RB36550
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm

Buy Now

ZERAMEX®XT LAB Screw RB & WB
RB36553
ZERAMEX® XT Lab Screw RB & WB
Length: 7.4mm

Buy Now

The post ZERAMEX®XT Transfer Closed Tray, long ,WB – WB37513 appeared first on Emerginnova.

]]> https://emerginnova.com/product/zeramex-xt-transfer-closed-tray-long-wb/feed/ 0 ZERAMEX®XT Transfer Open Tray WB – WB37510 https://emerginnova.com/product/zeramex-xt-transfer-open-tray-wb/?utm_source=rss&utm_medium=rss&utm_campaign=zeramex-xt-transfer-open-tray-wb https://emerginnova.com/product/zeramex-xt-transfer-open-tray-wb/#respond Tue, 04 Dec 2018 10:52:09 +0000 https://emerginnova.com/?post_type=product&p=1432 ZERAMEX® Prosthetics WB – Plattform

ZERAMEX®XT Transfer Open Tray WB

Sleeve height: 11mm
Height incl. screw: 20mm
Material: PEEK-CW30, Aluminum

The post ZERAMEX®XT Transfer Open Tray WB – WB37510 appeared first on Emerginnova.

]]>
Auxiliary parts Name Dimension material
ZERAMEX® XT Transfer Open Tray WB
ZERAMEX® XT Transfer Open Tray WB
Sleeve height: 11mm

Height incl. screw: 20mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Taking impressions Art no. name dimension Link

ZERAMEX® XT Transfer Open Tray RB
RB36510
ZERAMEX® XT Transfer Open Tray RB
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

ZERAMEX® XT Transfer Closed Tray RB
RB36512
ZERAMEX® XT Transfer Closed Tray RB
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
RB36513
ZERAMEX® XT Transfer Closed Tray, long RB
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

ZERAMEX® XT Scanbody RB (incl. Screw)
RB36514
ZERAMEX® XT Scanbody RB (incl. Screw)
Height: 10mm

Buy Now
Auxiliary parts Art no. name dimension Link

ZERAMEX®XT Implant-Replica RB
RB36520
ZERAMEX® XT Implant Replica RB
Length: 10mm

Buy Now

ZERAMEX® XT Provisional Screw RB & WB
RB36550
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm

Buy Now

ZERAMEX®XT LAB Screw RB & WB
RB36553
ZERAMEX® XT Lab Screw RB & WB
Length: 7.4mm

Buy Now

The post ZERAMEX®XT Transfer Open Tray WB – WB37510 appeared first on Emerginnova.

]]> https://emerginnova.com/product/zeramex-xt-transfer-open-tray-wb/feed/ 0 ZERAMEX®XT Provisional Screw RB & WB – RB36550 https://emerginnova.com/product/zeramex-xt-provisorium-screw-rb-wb/?utm_source=rss&utm_medium=rss&utm_campaign=zeramex-xt-provisorium-screw-rb-wb https://emerginnova.com/product/zeramex-xt-provisorium-screw-rb-wb/#respond Tue, 04 Dec 2018 10:52:08 +0000 https://emerginnova.com/?post_type=product&p=1420 ZERAMEX® XT Provisional Screw RB & WB:

Length: 8.6mm
Material: VICARBO®

 

The post ZERAMEX®XT Provisional Screw RB & WB – RB36550 appeared first on Emerginnova.

]]>
Auxiliary parts Name Dimension material
ZERAMEX® XT Provisional Screw RB & WB
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm
VICARBO®

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Taking impressions Art no. name dimension Link

ZERAMEX® XT Transfer Open Tray RB
RB36510
ZERAMEX® XT Transfer Open Tray RB
Sleeve height: 11mm

Height incl. screw: 20mm

Buy Now

ZERAMEX® XT Transfer Closed Tray RB
RB36512
ZERAMEX® XT Transfer Closed Tray RB
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now
RB36513
ZERAMEX® XT Transfer Closed Tray, long RB
Sleeve height: 11mm

Height incl. screw: 18mm

Buy Now

ZERAMEX® XT Scanbody RB (incl. Screw)
RB36514
ZERAMEX® XT Scanbody RB (incl. Screw)
Height: 10mm

Buy Now
Auxiliary parts Art no. name dimension Link

ZERAMEX®XT Implant-Replica RB
RB36520
ZERAMEX® XT Implant Replica RB
Length: 10mm

Buy Now

ZERAMEX® XT Provisional Screw RB & WB
RB36550
ZERAMEX® XT Provisional Screw RB & WB
Length: 8.6mm

Buy Now

ZERAMEX®XT LAB Screw RB & WB
RB36553
ZERAMEX® XT Lab Screw RB & WB
Length: 7.4mm

Buy Now

The post ZERAMEX®XT Provisional Screw RB & WB – RB36550 appeared first on Emerginnova.

]]> https://emerginnova.com/product/zeramex-xt-provisorium-screw-rb-wb/feed/ 0 Impression Material – SN Open Tray Impression Post – P35510 https://emerginnova.com/product/impression-material-sn-open-tray-impression-post/?utm_source=rss&utm_medium=rss&utm_campaign=impression-material-sn-open-tray-impression-post https://emerginnova.com/product/impression-material-sn-open-tray-impression-post/#respond Wed, 30 May 2018 12:27:04 +0000 https://emerginnova.com/?post_type=product&p=1136 Open and Closed Tray Impression Posts Lab Analog and Accuracy of implant impressions using various impression techniques and impression materials

The post Impression Material – SN Open Tray Impression Post – P35510 appeared first on Emerginnova.

]]>
Preview Name Dimension material
Impression Material - SN Open Tray Impression Post
ZERAMEX®P6 Transfer Open Tray SN
Sleeve height: 10mm

Height incl. screw: 19mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Impression Taking Art no. name dimension Link

Impression Material - SN Open Tray Impression Post
P35510
ZERAMEX®P6 Transfer Open Tray SN
Sleeve height: 10mm

Height incl. screw: 19mm

Buy Now

Impression Material - SN Closed Tray Impression Post
P35512
ZERAMEX®P6 Transfer Closed Tray SN
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now

The post Impression Material – SN Open Tray Impression Post – P35510 appeared first on Emerginnova.

]]> https://emerginnova.com/product/impression-material-sn-open-tray-impression-post/feed/ 0 Impression Material – SN Closed Tray Impression Post – P35512 https://emerginnova.com/product/impression-material-sn-closed-tray-impression-post/?utm_source=rss&utm_medium=rss&utm_campaign=impression-material-sn-closed-tray-impression-post https://emerginnova.com/product/impression-material-sn-closed-tray-impression-post/#respond Wed, 30 May 2018 12:27:03 +0000 https://emerginnova.com/?post_type=product&p=1133 Open and Closed Tray Impression Posts Lab Analog and Accuracy of implant impressions using various impression techniques and impression materials

The post Impression Material – SN Closed Tray Impression Post – P35512 appeared first on Emerginnova.

]]>
Preview Name Dimension material
Impression Material - SN Closed Tray Impression Post
ZERAMEX®P6 Transfer Closed Tray SN
Sleeve height: 7mm

Height incl. screw: 14mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Impression Taking Art no. name dimension Link

Impression Material - SN Open Tray Impression Post
P35510
ZERAMEX®P6 Transfer Open Tray SN
Sleeve height: 10mm

Height incl. screw: 19mm

Buy Now

Impression Material - SN Closed Tray Impression Post
P35512
ZERAMEX®P6 Transfer Closed Tray SN
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now

The post Impression Material – SN Closed Tray Impression Post – P35512 appeared first on Emerginnova.

]]> https://emerginnova.com/product/impression-material-sn-closed-tray-impression-post/feed/ 0 Impression Material – SN Lab Analog – P35520 https://emerginnova.com/product/impression-material-sn-lab-analog/?utm_source=rss&utm_medium=rss&utm_campaign=impression-material-sn-lab-analog https://emerginnova.com/product/impression-material-sn-lab-analog/#respond Wed, 30 May 2018 12:27:01 +0000 https://emerginnova.com/?post_type=product&p=1130 Impression Material - SN Lab Analog most accurate impression technique to transfer the intra-oral position of implant fixtures to the working cast.

The post Impression Material – SN Lab Analog – P35520 appeared first on Emerginnova.

]]>
Preview Name Dimension material
Impression Material - SN Lab Analog
ZERAMEX®P6 Implant Replica SN
Height: 10mm
Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Impression Taking Art no. name dimension Link

Impression Material - SN Open Tray Impression Post
P35510
ZERAMEX®P6 Transfer Open Tray SN
Sleeve height: 10mm

Height incl. screw: 19mm

Buy Now

Impression Material - SN Closed Tray Impression Post
P35512
ZERAMEX®P6 Transfer Closed Tray SN
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now

The post Impression Material – SN Lab Analog – P35520 appeared first on Emerginnova.

]]> https://emerginnova.com/product/impression-material-sn-lab-analog/feed/ 0