SN Open Tray Impression Post Archives - Emerginnova https://emerginnova.com/description/sn-open-tray-impression-post/ Wed, 19 Jun 2024 04:52:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.1 https://emerginnova.com/wp-content/uploads/2019/04/fav-100x100.png SN Open Tray Impression Post Archives - Emerginnova https://emerginnova.com/description/sn-open-tray-impression-post/ 32 32 Impression Material – SN Open Tray Impression Post – P35510 https://emerginnova.com/product/impression-material-sn-open-tray-impression-post/?utm_source=rss&utm_medium=rss&utm_campaign=impression-material-sn-open-tray-impression-post https://emerginnova.com/product/impression-material-sn-open-tray-impression-post/#respond Wed, 30 May 2018 12:27:04 +0000 https://emerginnova.com/?post_type=product&p=1136 Open and Closed Tray Impression Posts Lab Analog and Accuracy of implant impressions using various impression techniques and impression materials

The post Impression Material – SN Open Tray Impression Post – P35510 appeared first on Emerginnova.

]]>
Preview Name Dimension material
Impression Material - SN Open Tray Impression Post
ZERAMEX®P6 Transfer Open Tray SN
Sleeve height: 10mm

Height incl. screw: 19mm
PEEK-CW30, Aluminum

TAKING IMPRESSIONS

Closed tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Tighten the
lukewarm locking pin clockwise,
and check the position for a form-fit.
In case of doubt, take an X-ray.

3. Taking an impression:
Prepare the impression with a
closed tray and remove. Unscrew the
locking pin, remove the transfer from the implant, and give the transfer and impression to the dental technician.

Impression Material 4
Impression Material 5
Impression material 6

4. Connecting: Place the transfer sleeve on the external hexagon under slight pressure while turning it until it snaps into the hex head socket of the implant replica, rests securely on the shoulder, and can no longer be rotated. Screw the lukewarm locking pin tight clockwise.

5. Reposition and create a model: Reposition the transfer in the impression with the screwed-on implant replica and ensure that the seat is secure. Create a master model.

6. Restoration: Select a secondary component depending on the prosthetic requirements and the related procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

Open tray:

Impression Material 1
Impression Material 2
Impression Material 3

1. Positioning: Place the transfer sleeve on the conditions. external hexagon under slight pressure while turning until it snaps into the hex head socket, rests securely on the implant shoulder, and can no longer be rotated.

2. Screwing tight: Screw the transfer sleeve hand-tight. Tighten the lukewarm locking pin clockwise, and check the position for a form-fit. In case of doubt, take an X-ray.

3. Taking an impression: Create the impression with an open tray. Unscrew and remove the locking pin. Remove the impression, and give it to the dental technician with the locking pin.

Impression Material 4
Impression Material 5
Impression Material 6

4. Connecting: Place the implant replica on the external hexagon under slight pressure while turning until it snaps into the transfer sleeve, rests securely on the shoulder, and can no longer be rotated. Tighten the locking pin clockwise under lukewarm conditions.

5. Creating the model: Reposition the transfer with the screwed-on implant replica, and make sure that the seat is secure. Create a master model. Remove the locking pin before removing the impression.

6. Restoration: Select a secondary component depending on the prosthetic needs and the preferred procedure. Straight and angular screw-retained abutments (more on page 29) and straight and angular cemented abutments and Locator® (more on page 37) are available.

IMPRESSION TAKING

Impression Taking Art no. name dimension Link

Impression Material - SN Open Tray Impression Post
P35510
ZERAMEX®P6 Transfer Open Tray SN
Sleeve height: 10mm

Height incl. screw: 19mm

Buy Now

Impression Material - SN Closed Tray Impression Post
P35512
ZERAMEX®P6 Transfer Closed Tray SN
Sleeve height: 7mm

Height incl. screw: 14mm

Buy Now

The post Impression Material – SN Open Tray Impression Post – P35510 appeared first on Emerginnova.

]]> https://emerginnova.com/product/impression-material-sn-open-tray-impression-post/feed/ 0